New questions and challenges in Engineering

subject
Engineering, 18.01.2022 01:40
"Transformer is used to change the voltage"....
subject
Engineering, 18.01.2022 01:00
to avoid excessive catalyst temperatures and the possibility of fuel vapors reaching the converter ,the following rules are bein discussed; technician a says the its ok to use any fuel additives or cl...
subject
Engineering, 18.01.2022 01:00
A mechanical device rests in a level position on two supports, each 42 inches high, at 60°F. The support at one end is gray cast iron; at the other end, structural steel. What is the greatest amount t...
subject
Engineering, 17.01.2022 23:10
3. This material is considered flammable....
subject
Engineering, 17.01.2022 19:00
An R-12 vapor compression system has a condensing temperature of 50 o C and an evaporating temperature of 0 o C. The liquid leaving the condenser is a saturated liquid and the compression is isentropi...
subject
Engineering, 17.01.2022 18:00
The “Sun-Star” Company has purchased new office furniture for their offices at a retail price of $100,000. An additional $12,000 has been charged for insurance, shipping, and handling. The company expec...
subject
Engineering, 17.01.2022 16:10
ReAn R-12 vapor compression system has a condensing temperature of 50 o C and an evaporating temperature of 0 o C. The liquid leaving the condenser is a saturated liquid and the compression is isentro...
subject
Engineering, 17.01.2022 15:00
Importance of planning urban areas...
subject
Engineering, 17.01.2022 14:30
Dealer A in New York and dealer B in London used the following rates to change currency, namely euros (EUR), British pounds (GBP) and US dollars (USD): Dealer ABuySell 1.0000 EUR1.0202 USD1.02...
subject
Engineering, 17.01.2022 14:00
4. A refrigeration system using refrigerant 22 (R-22) is to have a refrigerating capacity of 80 kW. The cycle is a standard vapour compression cycle in which the evaporating temperature is -8°...
subject
Engineering, 17.01.2022 14:00
Study the wooden bookcase and the side of the bookcase shown below. Ten wooden bookcases are to be made in a school workshop Produce a labelled drawing of a simple template that would be used when dri...
subject
Engineering, 17.01.2022 14:00
For the MHC-PMS, propose a set of use cases that illustrates the interactions between a doctor, who sees patients and prescribes medicine and treatments, and the MHC-PMS ?...
subject
Engineering, 17.01.2022 14:00
Hi I don't know of yall remeber me, but I'm Jadin aka J. I am looking for my friend group, that I have missed but can't find cause of personal things so of y'all. Would help that would be great...
subject
Engineering, 17.01.2022 08:30
1. Examine the picture below. You have a battery pack and three cells arranged like so. You are given two wires to make all three bulbs light. a) draw the wires b) in another color, trace the Continuo...
subject
Engineering, 17.01.2022 01:00
Sir how to calculate QUANTITY of steel in this drawing. With formula of length/spacing+1 is not correct. please tell me how is calculated in this drawing
subject
Engineering, 16.01.2022 19:10
At a point in the test section of a supersonic wind tunnel, the pressure and density of the air are 1066 lb/ft2 and 1.23 × 10−3 slug/ft3, respectively. Calculate the temperature at this point. (Round...
subject
Engineering, 16.01.2022 16:20
A stationary gas turbine plant operates on the Brayton cycle and delivers 20,000 kW to an electric generator. The maximum temperature is 1200 K and the minimum temperature is 290 K. The minimum and ma...
subject
Engineering, 16.01.2022 15:00
Which emission is created by the heat in the combustion process?...
subject
Engineering, 16.01.2022 14:00
What percentage of people in the United States are farmers? A-Nearly 5 B-Less than 2 C-Slightly more than 10 D-Roughly 12...
subject
Engineering, 16.01.2022 06:50
How do you make and install a metal patch for a rustout?...
More questions